C4 Dual USB-C 3.1 + USB-A 3.0 square flange receptacle

No items found.

Connettori industriali WATERPROOF GT Contact.

Robusti e caratterizzati da elevati gradi di protezione IP
Range di Temperatura: (-40 +85)°C / (-40+105)°C
Per ambienti esterni: marino, industriale, veicoli elettrici, videosorveglianza, radiocomandi
La resinatura posteriore dei contatti impedisce l'ingresso di liquidi anche con connettore non accoppiato
Ampia selezione di tappi di chiusura
Resistenti ai raggi UV
Diverse opzioni di personalizzazione
Con approvazioni UL (In base al modello)

Dal menu a discesa, seleziona il retro pannello del connettore.

Per ulteriori personalizzazioni, contattaci.

*Lunghezza personalizzabile

C4, Flange Receptacle, USB 3.0, USB A, usb type-c

Per cablaggi completamente personalizzati consulta la sezione Cavi Costampati

Seleziona

Scheda Presentazione FFC

Richiedi Informazioni

Sito web produttore

RFID: per saperne di più

Consulta il Catalogo Brady

	Technical Data
Insulation Resistance	DC500V±10%, test for 1 minute and the insulation resistance should be more than 1000 M Ohm
Dielectric Withstanding Voltage	500 V DC/AC peak, contact-to-contact, for 1min; 750 V DC/AC peak, contact-to-test panel or contact-to-shield for 1 min.
Contact Resistance	30m Ohm at 10mA Max.
Durability	1500 cycles, rate of 200 cycles per hour.
Thermal Shock	5 cycles at -40°C / +105°C, after the test, the function and appearance can’t be impacted.
Waterproof Test	Water projected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful effects Test duration: at least 15 minutes Water volume: 12.5 litres per minute Pressure: 30 kPa at distance of 3 m
Visual and dimensional inspection	Must meet or exceed the requirements specified by the most current version of the USB specification.
Insertion and withdrawal forces	Speed: 10 mm/s maximum; Insertion: 35 N maximum at a maximum rate of 12.5 mm (0,492 seconds) per minute. Withdrawal: 10 N minimum at a maximum rate of 12.5 mm (0.492 seconds) per minute.
Physical shock	No discontinuities of 1 microsecond or longer duration when mated USB connectors are subjected to 11 microseconds duration 30 gigaseconds half-sine shock pulses. Three shocks in each direction applied along three mutually perpendicular planes for a total of 18 shocks.
Random vibration	The electrical load conditions shall be 100mA maximum for all contacts. Frequency: 50 to 2000 Hz PDS: 0.04 g² /Hz. Duration: 1 Hour/Axis, 3 Axes Total. g’s: 7.56 g rms
Temperature life W/O electrical load	85°C for 96 hours
Low temperature	-40°C for 96 hours
Temperature humidity cycling	4 cycles at 25°C / +65°C 95%RH (1 cycles/day)
UV exposure	24 hours equal 1 year: 8 hours UV at 70 °C (± 3) Black Panel Temperature 4 hours condensation at 50 (± 3) Black Panel Temperature

	Material
Panel Housing	PPS
USB Receptacle Housing	PBT
USB Receptacle Contacts	Copper Alloy, Au Plating
USB Receptacle Shell	Copper Alloy, Ni Plating
Rubber pad	Silicone
Screw gasket	EPDM
Glue	Epoxy
Panel Cap	Pa66
Spring	SUS
Screw	SUS
Rivet	Aluminum

Iscriviti alla newsletter

C4 Dual USB-C 3.1 + USB-A 3.0 square flange receptacle

C4 Dual USB-C 3.1 + USB-A 3.0 square flange receptacle

Configuratore Cavi FFC

Prodotti correlati

C2 Mini USB-B Plastic Cable-To-Cable Lock Type

Mini USB-B C2 size Plastic Cable To Cable (Over-molded with Pigtail)

HDMI C4 Plastic Cable End Plug Lock

Cavo USB C Costampato 90°

Richiedi informazoni per